| 耐高温无溶剂绝缘浸渍漆的研究 |
|
作者:佚名 文章来源:本站原创 点击数: 更新时间:2006-9-23 14:22:06  |
|
|
|
耐高温无溶剂绝缘浸渍漆的研究 【刊名】 高分子材料科学与工程, 2002年 05期 【作者】 左瑞霖 梁国正 常鹏善 杜超云 董礼达 【机构】 陕西西安 西北工业大学化学工程系 西安绝缘材料厂 【关键词】 间苯二甲酸二烯丙酯 环氧丙烯酸酯 耐高温无溶剂绝缘浸渍漆 单组分 【英文关键词】 diallyl isophthalate vinyl ester heat resistant solventless insulating impregnating varnish one component 【中英文摘要】 合成了以间苯二甲酸二烯丙酯 (DAIP)为主体、环氧丙烯酸酯 (VE)为改性剂的耐高温无溶剂绝缘浸渍漆 ,用 DTA分析了漆液的反应特性 ,讨论了 DAIP的预聚、VE含量等因素对漆液、浇铸体性能的影响 ,并对漆的常规性能进行了测试。与同类产品相比 ,研制无溶剂绝缘浸渍漆耐热性高、电性能好、成型工艺性优异、综合性能佳、单组分供货、室温使用期长 The heat resistant solventless insulating impregnating varnish, which mainly comprises of diallyl isophthalate (DAIP ) and vinyl ester (VE), was synthesized and tested. The curing process was characterized by DTA. The influencing factors such as prepolymerization of DAIP, DAIP∶VE recipe and inhibition effect were involved. The synthesized varnish has advantage on high heat resistance, good dielectric property, low curing temperature and long storage life.




| | |
| |
| |
本站收录的文章均来自互联网、期刊报纸及业内朋友推荐,供行业内朋友参考学习,文章的版权归作者和出版社,如有侵权请指出,我们会在第一时间内删除文章。 |
|
| 文章录入:wktl 责任编辑:wktl |
|
上一篇文章: C级单组分无溶剂绝缘浸渍漆的研究
下一篇文章: 水基绝缘浸渍漆 |
| 【字体:小 大】【发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口】 |